- Видео 855
- Просмотров 43 118 708
Woodpeckers
США
Добавлен 31 дек 2010
Woodpeckers has focused on making the highest quality woodworking tools available since we opened our doors in 1988. We manufacture precision measuring and layout tools, router tables and lifts, power tool jigs and accessories, table saw accessories, the world's finest drill press table and a variety of clamps and clamping accessories. All proudly made in Strongsville, Ohio.
Production Update: Straddle Squares | Woodpeckers Tools
Product Page: www.woodpeck.com/straddle-squares.html?
Joinery lay out almost always involves marking three sides of your stock at the same point. Chasing a critical measurement around your stock with a square takes patience, time and - let’s face it, luck. Woodpeckers Straddle Squares, are the perfect tools to have in your apron any time you need to mark both faces and one edge of your stock. Adjusting to a wide range of stock thicknesses, the two Straddle Squares grip your workpiece and give you perfectly aligned marking references on all three sides at once.
Joinery lay out almost always involves marking three sides of your stock at the same point. Chasing a critical measurement around your stock with a square takes patience, time and - let’s face it, luck. Woodpeckers Straddle Squares, are the perfect tools to have in your apron any time you need to mark both faces and one edge of your stock. Adjusting to a wide range of stock thicknesses, the two Straddle Squares grip your workpiece and give you perfectly aligned marking references on all three sides at once.
Просмотров: 2 120
Видео
Safe, Accurate, Repeatable Tapering With the Precision Taper Jig | Woodpeckers Tools
Просмотров 26 тыс.4 часа назад
PRECISION TAPER JIG: www.woodpeck.com/precision-taper-jig.html The hinged taper jig has occupied a spot in the arsenal of small shop furniture makers since table saws were invented. It’s use probably peaked during the 1950s and 1960s when “Mid-Century Modern” was born and tapered legs adorned almost every new piece of furniture. Until now, no one has put much thought into making the taper jig m...
Woodpeckers Blade Saver
Просмотров 1,9 тыс.7 часов назад
Woodpeckers BladeSavers are molded using tough, ABS plastic that will provide years of protection for your valuable saw blades. BladeSavers are available for 10" and 12" saw blades. www.woodpeck.com/woodpeckers-bladesaver.html?RUclips&Product Video&BladeSaver-09-2024
Woodpeckers 1281 Precision Woodworking Square Unboxing
Просмотров 2,4 тыс.16 часов назад
1281 Precision Woodworking Square: www.woodpeck.com/woodpeckers-precision-woodworking-square-12-x-261.html?RUclips&Unboxing&UNBOXING-JAY-08-2024 Success in the workshop depends on careful machinery set up, accurate layout and consistently checking your work during assembly. All three jobs call for a quality square, and here is the one that established Woodpeckers as a premier layout tool manufa...
Production Update: Handle Jig Plus
Просмотров 3,1 тыс.19 часов назад
Product Page: www.woodpeck.com/handle-jig-plus.html? Woodpeckers Handle Jig Plus enables you to rout custom-sized recessed handles in any cutting board, serving tray, or charcuterie board. The jig is fully adjustable for width and length of your handle recess from a small finger notch to a 7" wide, 5-1/2" long pocket. No longer do you have to build a one-off shop-made jig for every new board yo...
Add•An•Inch Block | Woodpeckers Tools
Просмотров 13 тыс.День назад
Product Page: www.woodpeck.com/add-an-inch-block.html? Woodpeckers new Add-an-Inch Block provides a safe and accurate way to make multiple short cross-cuts. Clamp the block to your rip fence well in front of the blade, then slide your stock to the block and make the cut. The offset between the block and the fence protects against trapping the cut pieces between the blade and the fence. As a bon...
Production Update: 3D Multi Marking Square
Просмотров 2,7 тыс.14 дней назад
Production Update: 3D Multi Marking Square
6-in-1 Pocket Gauge | Woodpeckers Woodworking Tools
Просмотров 14 тыс.14 дней назад
6-in-1 Pocket Gauge | Woodpeckers Woodworking Tools
Ultra-Shear Carbide Tipped Juice Groove Bits
Просмотров 2,1 тыс.14 дней назад
Ultra-Shear Carbide Tipped Juice Groove Bits
Elevate Your Projects With Tapers and Curves: End Table Build PT. 2
Просмотров 7 тыс.14 дней назад
Elevate Your Projects With Tapers and Curves: End Table Build PT. 2
Production Update | Modular Bar Gauge
Просмотров 1,7 тыс.21 день назад
Production Update | Modular Bar Gauge
Indexable Miter Gauge | Woodpeckers Tools
Просмотров 7 тыс.21 день назад
Indexable Miter Gauge | Woodpeckers Tools
Deep Dive: Ultra-Shear Solid Carbide Spiral Bits Explained.
Просмотров 6 тыс.28 дней назад
Deep Dive: Ultra-Shear Solid Carbide Spiral Bits Explained.
Simple Set Fence Gauge | Woodpeckers Tools
Просмотров 3,3 тыс.28 дней назад
Simple Set Fence Gauge | Woodpeckers Tools
Ultra-Shear Carbide Tipped Template Pattern Bits | Woodpecker's Tools
Просмотров 2,5 тыс.Месяц назад
Ultra-Shear Carbide Tipped Template Pattern Bits | Woodpecker's Tools
StabilmaxRT Router Table System Production Update
Просмотров 3,9 тыс.Месяц назад
StabilmaxRT Router Table System Production Update
How to use the Cam-A-Line Dowel Guide + Helpful Layout Tips: End Table Build PT. 1
Просмотров 8 тыс.Месяц назад
How to use the Cam-A-Line Dowel Guide Helpful Layout Tips: End Table Build PT. 1
Precision Triangles | Woodpeckers Tools
Просмотров 5 тыс.Месяц назад
Precision Triangles | Woodpeckers Tools
Ultra-Shear Carbide Tipped Juice Groove Bits | Woodpeckers Tools
Просмотров 4,1 тыс.Месяц назад
Ultra-Shear Carbide Tipped Juice Groove Bits | Woodpeckers Tools
Ultra Shear 80-Tooth Miter Saw Blades
Просмотров 4,3 тыс.Месяц назад
Ultra Shear 80-Tooth Miter Saw Blades
BigCal Production Update | Woodpeckers Tools
Просмотров 4 тыс.Месяц назад
BigCal Production Update | Woodpeckers Tools
Auxiliary Rip Fence | Woodpeckers Tools
Просмотров 14 тыс.Месяц назад
Auxiliary Rip Fence | Woodpeckers Tools
Making the No. 94 Dual Beam Scribe | Production Update
Просмотров 3,5 тыс.Месяц назад
Making the No. 94 Dual Beam Scribe | Production Update
Ultra-Shear Carbide Tipped Roundover Bits
Просмотров 2,7 тыс.Месяц назад
Ultra-Shear Carbide Tipped Roundover Bits
EZ-Drive for Slab Flattening Mills | Woodpeckers Tools
Просмотров 6 тыс.Месяц назад
EZ-Drive for Slab Flattening Mills | Woodpeckers Tools
Ultra-Shear Ultimate Stacked Dado Set | Woodpeckers Tools
Просмотров 6 тыс.2 месяца назад
Ultra-Shear Ultimate Stacked Dado Set | Woodpeckers Tools
This media is not the best for woodworking I prefer regular RUclips with longer videos and details instead of these repetitive music and short clip repeating over and over
Love this tool, but I’m not waiting to turn off my router when I’m two feet away from the blade, if you’re so afraid of woodworking, maybe you should consider macrame, let me know, I need a good scarf for the winter.
What a freaking mess. 😆
I guess you never flattened a board with a router, you can buy a planner
Will iron grip work for coping cuts (rail and stile door matched bit stuff)? Most coping sleds raise the cut piece since the piece rides on the sled base. It is more difficult to switch between rail and style cuts since rails are on the router table and stiles ride on the sled base. If seems the iron grip might make a more consistent setup when switching rail and stile bits ...
Hi Jeff, I have an issue when tightening the Iron Grip. The button that let's you quicklyl move the arm most of the time doesn't lock. So when I try to get a firm grip on the piece it slips. Sometimes if I pull up on the button I can get it to lock, other times it just keeps slipping. Do you have any suggestions on how to fix that? Thanks, Tim
Wonderfull
i am new to this woodpecker program it is great thank you
공방 너무 멋지게 꾸며 놨네...
This is the worst woodpecker product I ever bought! No joke. I was so thankful they only made me eat the shipping both ways and refunded me . Buy a digital gauge and some steak dinners and thank me later.
Another useless unaffordable tool
Shouldn’t be $60 for something like this. Do they even have a tool for $20 or less?
I will not be buying this! Why should I when I make all I need for free out of scrap.
Беру , дайте две
Every Woodpeckers tools I have bought is rock solid. I'll keep buying from them. They are made in the USA and keeping people here employed. You get what you pay for.
This is just a copy of what's called a planer gauge a machinist tool that's been around for 100 years
Nice tools. But, ridiculously overpriced.
You're on sky...best wishes from India.
👍🙏
Perhaps a bit niche, but it would be really cool if there were also smaller ones, for eg.: 8.25" are common, as well as 6.3" (Festool track saws). I'm definitely ordering a few of these, it's simple and brilliant.
Easily sized to smaller blades. The links pop apart with a twist, and you can remove the links not needed.
@@WoodpeckersLLC Ohhh that was not obvious at all from the product description or video... But very clever! Thank you!
Web link didn't work for me.
Слетает лепесток, если его постоянно не прижимать
Please measure the diagonals
Nice project! Thanks! Who is playing the music on this video?
I’m interested in buying one, but the link in a description does not work. Is this something that is sold at Harbor Freight?
😅
Apologies, the link has been fixed and you should be able to navigate to the ordering page now!
you will find actual woodpeckers on sale at HF before you find Woodpeckers tools there 😂
Product link is a 404.
Who will be first? The "Where's the metric version?" whiners or the "I could make it cheaper myself" whiners?
i made my own for free with a metric-celsius bike chain
I get why you're making this joke but metric/imperial is actually irrelevant here so you're just showing your frustration... stick to imperial all you want, nobody is forcing you to keep up with the times.
Jay, Loved the video with one recommendation. The content is well-organized, easy to follow, and clear. The music is okay, but it is often louder than your voice and I have to use sub-titles to know what you said. While the visuals are well captured and tell most of the direction, your narration is very helpful and adds a useful element to create a more complete and finished delivery. Your voice narration is more important to hear than the machinery or the music. Suggest you use a separate track for your voice and increase the final volume on the voice-over track, or alternatively lower the other two tracks (music and the raw footage audio) to make them quieter and not compete with your words. What you say matters. Keep making these.
Thank you so much for this feedback, very helpful! Please take a minute to watch the last few videos I've done on making the end table. I've since adjusted the audio and believe I've found the right settings. I'd love to hear what you think and see if I've corrected the issue. Thanks again!
Fantástico, mejor imposible!!!!
It's nice to have both imperial and metric on the sliding scale, but the 1" increments for the holes make that metric scale unusable. Any chance for a metric version with holes at, say, 20mm increments?
Cost more the tool than the whole closet😂.
I can also cut a one inch block of wood and clamps it to the fence for free.
An excellent presentation in all respects except one: That music gets annoying after the first few seconds.
How much are the payments?
Como compra aqui no Brasil?😊
Price: probably $300
Leider kein Metrisches System
The fence should have an indexing center-line on it. I added one with layout blue and a scriber.
What is the thinnest and most thick wood that you can use in the clamps?
This tool works great! 👍
Great sled, but I am wandering how do I set this up for tenons with a 50mm straight routerbit ?
Can I borrow one?
Pueden hacer envíos a Perú 🇵🇪, América del Sur?
❤❤❤❤❤
I have to watch videos with the audio streaming going straight into my hearing aids. The guitar music in the background is really off-putting. I'd watch more videos if you could get rid of the background music. Thanks.
I have this jig and will be selling it. I cannot run the cope and stick in the same plane. Both cope and stick should reference to the table top for one setup like my shaper does. Your construction is very well done as I would expect from Woodpeckers but the coping sleds design can be better. I do thank you for your very well detailed explanations of setups which are the best.
Why do you have a track in the table when the fence is not automatically parallel to it like Kreg has. Kreg is the only mfr who does this? This could be incorporated into the micro adjust structure. Anything Woodpeckers makes is super accurate. Wouldn't it make sense to keep the fence parallel to the track in the table, just sayin'.
Completely and totally unnecessary. Parallelism of a router table fence has no effect whatsoever on the depth or linearity of a cut. Stop worrying about it. Just measure the projection of the bit from the fence. The one and only time the fence needs to be parallel with the miter track is when you're using the mitre track, as in coping and tenon cuts.
Mine is so beat up from using it at work
Какая цена и в какой стране вы находитесь?
USA and you dont want to know the price.
He does want to know the price because he is not a whiner like you
Lokasi mana mas?
Beautiful tool but I use two sticks